Intersoft Community - WebCombo - Jquery 2.0.3 in IE11 compatibility mode Error

Jquery 2.0.3 in IE11 compatibility mode Error

leo.c — Tue, 03 Mar 2015 03:35:16 GMT

Hi Giridhar JG,

I apologize for any inconvenience this problem may have caused you.

Regarding this issue, it seems IE11 remove attachEvent API in IE11 Compatibility Mode. So please try change X-UA-Compatible to "IE=10" to using WebCombo on IE11 compatibility mode.

Best Regards,
Leo

Jquery 2.0.3 in IE11 compatibility mode Error

sphinxg@usa.net — Mon, 02 Mar 2015 07:38:04 GMT

Hi Leo,

I have tried changing the ScriptDirectory and other option of removing the keys from Web.config.

Still the issue remains. The issue exists only in the Compatibility View of IE11 ; and works fine in the native mode. Also if we do not use JQuery in the page then it works in Compatibility view.

Please let us know your suggestions for this.

With Thanks and Regards,

Giridhar JG

Jquery 2.0.3 in IE11 compatibility mode Error

leo.c — Mon, 02 Mar 2015 03:49:28 GMT

Hi Giridhar JG,

Thanks for your sample you have provided.

It seem that there is a problem with your web configuration. WebCombo ScriptDirectory have been set to a wrong path. Please set it as the following:
<add key="ISNet.WebUI.WebCombo.v6_0_7200.ScriptDirectory" value="~/CommonLibrary/WebCombo/V6_0_7200/"/>

Your webcombo should run normally. As a side note, you don't need to specify the above key as smart resources was used in your configuration. So as an option, you could just comment/remove the following key in your web configuration:

Best Regards,
Leo

Jquery 2.0.3 in IE11 compatibility mode Error

sphinxg@usa.net — Fri, 27 Feb 2015 09:41:32 GMT

Hi,

When using Intersoft Webcombo and JQuery 2.0.3 and when browsed through IE11 compatibility mode,

I face a script error as seen in the attached image.

I have also attached the sample program that will help in recreating the issue.

Please help in this.

With Thanks and Regards,

Giridhar JG