Intersoft Community - ClientUI - Question on cell movement in UXGridView

Question on cell movement in UXGridView

yudi — Tue, 18 Jun 2013 02:44:10 GMT

Thank you very much for the sent video.

I was able to reproduce the reported problem in my local end and have forwarded this to UXGridView development team for further investigation. This item is filed under work item #1442.

I’ll let inform you the status of this matter by updating the information in this thread.

Question on cell movement in UXGridView

BillGower — Mon, 17 Jun 2013 10:39:41 GMT

I have created a video showing how it works on my computer. For the first new row i have to click into the cells or click an existing row first before entering a new row. Take a look at this video.

Question on cell movement in UXGridView

yudi — Mon, 17 Jun 2013 02:05:38 GMT

Thank you for the prompt response.

I have Intersoft WebUI Studio 2012 R2 installed in my local end. The reported problem, possible bug which has to do with DevForce; WPF; and UXGridView, is tested using WPF UXGridView C# Sample project (start > All Programs > Intersoft WebUI Studio 2012 R2 > WebUI Studio for WPF > Development Samples > UXGridView C# Sample).

After the project is run, I navigate and run the TemplateColumn sample page (select UXGridView > Column Template from the left pane). Unfortunately, I was unable to reproduce the reported problem. The experience of cell movement in UXGridView is similar to the UXGridView in Silverlight project as shown in the video attached on my previous post (June 13, 2013).

Please have the sample tested on your local end and feel free to let us know if you have different result.

Question on cell movement in UXGridView

BillGower — Sun, 16 Jun 2013 13:32:30 GMT

I figured out the problem. This is a bug. It has to do with Devforce and WPF and UXGridView. I ran the Silverlight Devforce example provided by Intersoft and it works fine. As you tab from cell to cell the cursor is automatically placed in edit mode in the new cell. I ran the WPF version of the same sample and it doesnt work. It does what my app is doing. You have to click in each cell first to get into edit mode. So there is a bug in the dlls used in WPF/Devforce for the UXGridView.

Question on cell movement in UXGridView

BillG — Fri, 14 Jun 2013 17:18:58 GMT

ok this is driving me crazy. I am attaching a sample app. It uses the Product table of the Northwind database. It loads and saves the grid just fine. I just cant get it to automatically move from cell to cell in edit mode. I have to click into the cell first in order to edit it. Can you spot what i am doing wrong? Thank you for all your help. I really appreciate it. Just to let you know it a WPF app using .net 4.0 in Visual Studio 2012, Ideablade 6.1.13 and the latest r2 release of Intersoft ClientUI.

Bill

Question on cell movement in UXGridView

yudi — Fri, 14 Jun 2013 00:45:46 GMT

Really sorry for the inconvenience. I have re-attached the sample project. Please feel free to let me know if you still have any difficulties to download the sample project.

Question on cell movement in UXGridView

BillGower — Fri, 14 Jun 2013 00:19:10 GMT

i could not open the zip file.

Question on cell movement in UXGridView

yudi — Thu, 13 Jun 2013 23:51:30 GMT

I enclosed a simple sample of UXGridView in WPF project and a video which shows the cell movement and editing behavior in UXGridView as attachment. Please have the sample evaluated on your end and let me know if you find anything that I might miss.

Thank you and have a nice day.

Question on cell movement in UXGridView

BillGower — Thu, 13 Jun 2013 18:41:36 GMT

This is what my gridview properties are set to and when i tab from one column to the next i am not automatically in edit mode. I have to click into the cell first. This is a Wpf app.

 AutoEditOperation="True" AutoGenerateColumns="False"  CanUserAddRows="True"CanUserDeleteRows="True"CanUserEditRows="True"DeleteRowCommand="{Binding DeleteRowCommand}"EditEnterKeyAction="MoveToNextEditableCell"
EnterKeyAction="EnterEdit"HasChanges="{Binding HasChanges}"InsertRowCommand="{Binding InsertRowCommand}"IsBusy="{Binding IsBusy, Mode=TwoWay}" ItemsSource="{Binding Payments}" NewItem="{Binding NewPayment, Mode=TwoWay}" PrepareNewRowCommand="{Binding PrepareNewRowCommand}" QueryOperation="Client" RefreshCommand="{Binding RefreshCommand}" RejectChangesCommand="{Binding RejectChangesCommand}" RejectRowCommand="{Binding RejectRowCommand}" SaveChangesCommand="{Binding SaveChangesCommand}" SelectedItem="{Binding SelectedPayment,Mode=TwoWay}"UpdateCellCommand="{Binding UpdateCellCommand}"UpdateRowCommand="{Binding UpdateRowCommand}"ValidateRowCommand="{Binding ValidateRowCommand}" CanUserBatchUpdate="True">

What am i missing here?

Question on cell movement in UXGridView

yudi — Wed, 12 Jun 2013 06:30:59 GMT

UXGridView has keyboard gesture feature which is determined by several properties such as EditKeyGesture, EnterKeyAction, EditEnterKeyAction. Each property has specific action that you can customize. The following list details the action of each property.

EditKeyGesture

F2 : Directly begin edit on the currently selected cell using F2 key.
AnyKeyStroke : Directly begin edit on the currently selected cell from any key stroke.

EnterKeyAction

EnterEdit : Directly begin edit on the selected cell using Enter key.
MoveToNextRow : Move to next row (does not edit the cell).

EditEnterKeyAction

CommitAndMovetoNextRow : Commit the changes made in the edited row and move to the next row.
ExitEdit : Exit the editing of the selected cell.
MoveToNextEditableCell : Move to next editable cell. (Will move to next row’s cell when it reaches the end of the row)

For your scenario, please try to set EditEnterKeyAction to MoveToNextEditableCell and EnterKeyAction to EnterEdit. We happen to have a sample that might suit to your required scenario. Please kindly check the live sample in this link and let us hear whether this helps or not.

Question on cell movement in UXGridView

BillGower — Tue, 11 Jun 2013 11:01:09 GMT

I want the user to be able to enter a value and then tab to the next cell in the row enter a new value and then at the end of the row have the cursor move to a new row. As the user moves from one cell to the next i want the editing to be automatic meaning they don't have to click in the cell, the cursor is already in the cell ready for input.

What settings do i need for this?